How to Flash Samsung Clone A9 (7) MT6580 6.0 Firmware
If you are looking for a tested and working flash file for your Samsung Clone A9 (7) MT6580 6.0 device, you have come to the right place. In this article, I will show you how to download and flash the firmware using SP Flash Tool.
What is Samsung Clone A9 (7) MT6580 6.0 Firmware
Samsung Clone A9 (7) MT6580 6.0 Firmware is a software program that is installed on the internal memory of your device. It contains the operating system, the user interface, and other features that make your device function properly. Firmware can also be called ROM or stock ROM.
Why do you need to flash Samsung Clone A9 (7) MT6580 6.0 Firmware
There are many reasons why you might need to flash Samsung Clone A9 (7) MT6580 6.0 Firmware on your device. Some of them are:
Your device is stuck on the boot logo or boot loop.
Your device is infected with malware or viruses.
Your device is running slow or lagging.
Your device has corrupted system files or partitions.
You want to upgrade or downgrade your device's software version.
You want to unroot or remove custom recovery from your device.
You want to restore your device to its original factory settings.
How to download Samsung Clone A9 (7) MT6580 6.0 Firmware
To download Samsung Clone A9 (7) MT6580 6.0 Firmware, you need to follow these steps:
Go to this link: https://www.youtube.com/watchv=XEKhx7zM-oM
Watch the video and follow the instructions to get the download link.
Click on the download link and wait for the file to be downloaded.
Extract the zip file using WinRAR or 7-Zip.
You will get a folder containing the firmware files and the flash tool.
How to flash Samsung Clone A9 (7) MT6580 6.0 Firmware using SP Flash Tool
To flash Samsung Clone A9 (7) MT6580 6.0 Firmware using SP Flash Tool, you need to follow these steps:
Make sure you have backed up your important data and fully charged your device's battery.
Install the USB drivers for your device on your computer. You can find them in the firmware folder or download them from here: https://androidmtk.com/download-mtk-usb-all-drivers
Open the SP Flash Tool folder and run the flash_tool.exe file as administrator.
Click on the Scatter-loading button and browse to the firmware folder. Select the MT6580_Android_scatter.txt file and click Open.
All the firmware files will be loaded on the SP Flash Tool window. Make sure they are all checked and have green ticks.
Click on the Download button and connect your device to your computer via USB cable while holding the Volume Down or Volume Up button (depending on your device).
The flashing process will begin and you will see a red bar, followed by a yellow bar, and finally a green circle with a check mark when it is done.
Disconnect your device from your computer and reboot it.
Congratulations! You have successfully flashed Samsung Clone A9 (7) MT6580 6.0 Firmware on your device. 061ffe29dd