ISmart I3G Plus Flash File Firmware Stock Rom MT6572 4.4.2
CLICK HERE ::: https://tlniurl.com/2tA2Mc
How to Flash iSmart i3G Plus Firmware Stock Rom MT6572 4.4.2
If you are looking for a way to flash the firmware or stock ROM on your iSmart i3G Plus smartphone, then you have come to the right place. In this article, we will show you how to use the QFIL Tool to flash the MBN or ELF firmware file on your device. This method works for devices with Qualcomm Snapdragon chipset, such as the iSmart i3G Plus which has a MT6572 processor and runs on Android 4.4.2 KitKat.
Flashing the firmware or stock ROM can help you to unbrick your device, fix bootloop issues, restore the original factory settings, or upgrade or downgrade your software version. However, flashing can also cause data loss, so make sure you backup your important files before proceeding. Also, flashing can void your warranty, so do it at your own risk.
What You Need
A Windows PC or laptop.
A USB cable to connect your device to the PC.
The QFIL Tool (Qualcomm Flash Image Loader). You can download it from here [^1^].
The MBN or ELF firmware file for your iSmart i3G Plus device. You can download it from Google by searching for \"iSmart i3G Plus Flash File Firmware Stock Rom MT6572 4.4.2\". Make sure you download the correct file for your device model and region.
The iFi audio drivers for your device. You can download them from here [^2^].
A fully charged battery or at least 50% of battery life.
How to Flash iSmart i3G Plus Firmware Stock Rom MT6572 4.4.2
Extract the QFIL Tool zip file to any convenient location on your PC and double click on the QFIL.EXE file to launch the tool.
On the QFIL Tool interface, click on Browse and locate the MBN or ELF firmware file that you downloaded for your device.
Click on Load XML and select the rawprogram0.xml and patch0.xml files that are inside the firmware folder.
Turn off your device and press and hold the Volume Up and Volume Down buttons simultaneously. Then connect your device to the PC using the USB cable.
The QFIL Tool should detect your device and show it under Port in green color.
Click on Download to start flashing the firmware on your device.
Wait for the flashing process to complete. It may take a few minutes depending on the size of the firmware file.
Once done, you will see a Download Succeed message on the QFIL Tool.
Disconnect your device from the PC and reboot it.
Congratulations! You have successfully flashed the firmware or stock ROM on your iSmart i3G Plus device.
Troubleshooting Tips
If you encounter any errors or issues while flashing the firmware using the QFIL Tool, here are some possible solutions:
If you see a Download Fail message, make sure you have selected the correct firmware file and try again.
If you see a Firehose Fail or FHLoader Fail message, make sure you have installed the iFi audio drivers correctly and try again.
If you see a Process Fail message, make sure you have followed all the steps correctly and try again.
If your device gets stuck in a bootloop after flashing, perform a factory reset by holding down the Power and Volume Down buttons until you see a recovery menu. Then select Wipe data/factory reset and confirm with Power button.
I hope 061ffe29dd