Mtk Flashtool V5 1128 06.rar
DOWNLOAD >>> https://urlin.us/2tz1cS
How to Flash MediaTek Stock Firmware Using MTK Flash Tool
MTK Flash Tool is a small application for Windows Computer that allows you to flash or install the stock firmware on MediaTek powered devices. In this article, I will show you how to use MTK Flash Tool to flash MTK Flashtool V5 1128 06.rar file on your phone.
What is MTK Flashtool V5 1128 06.rar
MTK Flashtool V5 1128 06.rar is a compressed file that contains the stock firmware for MediaTek devices. The firmware is based on scatter.txt file format and can be flashed using MTK Flash Tool. The file name indicates the version of the tool and the date of release.
Why do you need to flash MTK Flashtool V5 1128 06.rar
There are many reasons why you may need to flash MTK Flashtool V5 1128 06.rar on your phone. Some of them are:
To unbrick your phone if it is stuck at boot logo or boot loop.
To upgrade or downgrade your phone's software version.
To remove screen lock, pattern, password, pin, or FRP lock from your phone.
To fix software issues, bugs, errors, or glitches on your phone.
To restore your phone to factory settings.
How to use MTK Flash Tool to flash MTK Flashtool V5 1128 06.rar
Before you proceed, make sure you have the following requirements:
A Windows PC (Windows XP to Windows 10, x32 or x64 bit).
A USB cable to connect your phone to the PC.
A backup of your phone's data as flashing will erase everything.
A charged battery (at least 60%) on your phone.
The correct drivers for your phone installed on the PC. You can download them from here.
The MTK Flash Tool downloaded from here. Choose the version that matches the file name of MTK Flashtool V5 1128 06.rar.
The MTK Flashtool V5 1128 06.rar file downloaded from a reliable source. Make sure it is compatible with your phone's model and chipset.
Once you have everything ready, follow these steps:
Extract the MTK Flash Tool and the MTK Flashtool V5 1128 06.rar file using a tool like WinRAR or 7-Zip. You will get a folder with some files and a subfolder with the firmware files.
Open the MTK Flash Tool folder and run the Flash_tool.exe file as administrator.
In the tool's interface, click on the Download/Config button and locate the scatter.txt file from the firmware folder. The tool will load the firmware information and show it on the screen.
Click on the Download button and wait for the tool to initialize.
Turn off your phone and remove the battery if possible. Then connect it to the PC via USB cable while holding the Volume Down or Volume Up button (depending on your phone).
The tool will detect your phone and start flashing the firmware. You will see a progress bar and a green circle when it is done.
Disconnect your phone and reinsert the battery. Then turn it on and enjoy your new firmware.
If you encounter any error or problem while using MTK Flash Tool, here are some tips to help you:
Make sure you have installed the correct drivers for your phone and PC. You can try different USB ports or cables if necessary.
Make sure you have downloaded the correct firmware for your phone's model and chipset. You can check it by going to Settings > About Phone on your phone.
Make sure you have extracted the firmware files properly and not modified or deleted 061ffe29dd